Use this to enable or disable Ring-in signals to power on the system from power soft-off mode. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Make sure to unplug the power cord before installing or removing the motherboard. The CPU fits only in one correct orientation. It refers to a section of the PCI memory address range used for graphics memory. Install the necessary drivers to activate the device. We recommend that you leave this field at the default value unless your AGP card requires other sizes.
|Date Added:||17 October 2009|
|File Size:||54.48 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Unlock a DIMM slot by pressing the retaining clips outward.
ASRock K7VT2 – motherboard – ATX – Socket A – KT266A
To access the menu bar asrokc, press the right or left arrow key on the keyboard until the desired item is highlighted. This is an interface for front panel audio cable that allows convenient connection and control of audio devices.
If automatic detection fails, this may due to the hard disk is too old or too new. Installing an expansion card Step 1.
ASRock K7VT2 VIA Audio Driver Download for Windows XP x32, ver. a
Unlock the socket by lifting the lever up to a 90 to angle. If automatic detection is successful, BIOS Setup automatically fills in the correct values for the remaining fields on this sub-menu.
Connect an ATX power supply to the connector. Keep the asorck for later use. User password has been set. Unplug the power cord from the wall socket before touching any component. COM 1 Parallel port: MAIN Use this menu to make changes to the basic system configuration.
Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card. Although K7VT2 offers stepless control, it is not recommended to perform over clocking. The default is 4X. DO NOT place jumper caps over these l7vt2. The AGP slot is used to install a graphics card.
To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Connector FDD connector pin floppy see p. The motherboard detects the memory module s inserted and automatically assigns appropriate frequency.
Refer to your OS documentation for more information. However, this is not recommended unless you thoroughly knows the feature. Incorrect settings may cause the system to fail to recognize the installed hard disk. Axrock allows the user to select the value as operating frequency. All changes are discarded. Thermal grease between the CPU and the heatsink is also needed to improve heat transfer.
ASROCK K7VT2 User manual |
The following table lists the keys found in the legend bar with their corresponding functions. Refer to the drive documentation to determine the correct value. Make sure m7vt2 unplug the power cord before installing or removing the motherboard.
Also, for proper operation, it is not recommended to use two different brands of the DIMMs at the same time. It is a menu-driven program, which means you can scroll through its various submenus and make your selections among the predetermined choices. Use this to enable or disable floppy drive controller.
It refers to a section viq the PCI memory address range used for graphics memory. Connect the fan cable to the connector matching the black wire to the ground pin. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply.
The CPU fits only in one correct orientation.